SC16C550

Product Summary

The SC16C550 is a Universal Asynchronous Receiver and Transmitter (UART) used for serial data communications. Its principal function is to convert parallel data into serial data, and vice versa. The UART can handle serial data rates up to 3 Mbits/s. The SC16C550 is pin compatible with the ST16C550, TL16C550 and PC16C550, and it will power-up to be functionally equivalent to the 16C450. Programming of control registers enables the added features of the SC16C550. Some of these added features are the 16-byte receive and transmit FIFOs, automatic hardware or software flow control and Infrared encoding/decoding. The selectable auto-flow control feature significantly reduces software overload and increases system efficiency while in FIFO mode by automatically controlling serial data flow using RTS output and CTS input signals. The SC16C550 also provides DMA mode data transfers through FIFO trigger levels and the TXRDY and RXRDY signals. On-board status registers provide the user with error indications, operational status, and modem interface control. System interrupts may be tailored to meet user requirements. An internal loop-back capability allows on-board diagnostics. The SC16C550 operates at 5 V, 3.3 V and 2.5 V, and the Industrial temperature range, and is available in plastic DIP40, PLCC44 and LQFP48 packages.

Parametrics

Absolute maximum ratings:(1)supply voltage, VCC: 7V; (2)voltage at any pin , Vn: GND-0.3 to VCC+0.3V; (3)operating temperature, Tamb: -40 to +85℃; (4)storage temperature, Tstg: -65 to +150℃; (5)total power dissipation per package, Ptot(pack): 500mW.

Features

Features:(1)5 V, 3.3 V and 2.5 V operation; (2)Industrial temperature range; (3)After reset, all registers are identical to the typical 16C450 register set; (4)Capable of running with all existing generic 16C450 software; (5)Pin compatibility with the industry-standard ST16C450/550, TL16C450/550, PC16C450/550; (6)Up to 3 Mbits/s transmit/receive operation at 5 V, 2 Mbits/s at 3.3 V, and 1 Mbit/s at 2.5 V; (7)16 byte transmit FIFO; (8)16 byte receive FIFO with error flags; (9)Programmable auto-RTS and auto-CTS; (10)Automatic software/hardware flow control; (11)Programmable Xon/Xoff characters; (12)Software selectable Baud Rate Generator; (13)Four selectable Receive FIFO interrupt trigger levels; (14)Standard modem interface or infrared IrDA encoder/decoder interface; (15)Sleep mode.

Diagrams